This problem may have multiple causes:
The appliance is not connected to the mains.
The dry-boil protection has been activated.
The kettle needs to be descaled.
Below you can find the solutions for each of these causes.
Solution Cause 1: The appliance is not connected to the mains. Check if the plug of the kettle has been inserted properly into the wall socket and if the wall socket is working.
Solution Cause 2: The dry-boil protection has been activated. The dry-boil protection is a safety feature that automatically switches off the kettle. It will be activated if the kettle is switched on with insufficient or no water inside or if all of water inside the kettle has evaporated during operation.
To reset the dry-boil protection, you have to lift the kettle from its base and fill it with cold water. When you place the kettle back on the base, the dry-boil protection is reset and you can switch the kettle on again.
Solution Cause 3: The kettle needs to be descaled. Regularly descaling your kettle will help to: reduce the boiling time and save energy, keep the inside of the kettle clean and extend the kettles life.
Regular descaling prolongs the life of the kettle. We recommend that you descale regularly - at least monthly.
You must only use a descaler that is suitable for use in plastic products. If you use a descaling agent, follow the instructions on the bottle or package to descale your kettle.
If the above solution(s) did not help to solve your problem, please contact the Russell Hobbs Consumer Service Department on 0345 658 9700.